things i need to get >_>
3 posters
Page 1 of 1
things i need to get >_>
SO now that I bought long tubes and o/r h pipe i need new gaskets and bolts
gaskets: http://www.jegs.com/i/Mr.+Gasket/720/5930/10002/-1
bolts: http://www.jegs.com/i/Stage+8/868/8913/10002/-1
And now that my alternator went i need a new one of those too...
http://www.americanmuscle.com/130amp-alternator-8793.html
do i need the power wire kit too?
With these said... are there any objections to them? i heard i should defff get the locking header bolts and a 130 amp alternator would be great especially since i have an audio system but would anyone recommend otherwise?
Also, just realized that the hpipe i bought... doesnt have flanges on the side where it connects to the catback, guy had it welded.... what can i do? I found this.. http://www.spintechmufflers.com/exhaust-hardware/ball-cone-adaptors-connections/bc25-2a-ball-cone-connection/prod_670.html but id need someone to weld them on :/
gaskets: http://www.jegs.com/i/Mr.+Gasket/720/5930/10002/-1
bolts: http://www.jegs.com/i/Stage+8/868/8913/10002/-1
And now that my alternator went i need a new one of those too...
http://www.americanmuscle.com/130amp-alternator-8793.html
do i need the power wire kit too?
With these said... are there any objections to them? i heard i should defff get the locking header bolts and a 130 amp alternator would be great especially since i have an audio system but would anyone recommend otherwise?
Also, just realized that the hpipe i bought... doesnt have flanges on the side where it connects to the catback, guy had it welded.... what can i do? I found this.. http://www.spintechmufflers.com/exhaust-hardware/ball-cone-adaptors-connections/bc25-2a-ball-cone-connection/prod_670.html but id need someone to weld them on :/
Re: things i need to get >_>
that 130 amp alternator and the power wire is a MUST have. my stock 90 amp barely got me home from the DC auto show last year. if you dont use that power wire the wires to the alt. will fry i ended up having to use extra wire which i got from work. these buses at work use the same gauge wire. and your gonna have to grind/modify your alternator bracket you'll see when you try to install it. its easy and worth it!! what brand long tubes did you get?
AAron83- COBRA
- Number of posts : 991
Age : 41
Location : Wheaton MD
Registration date : 2008-01-28
Re: things i need to get >_>
ok. ive always disliked mac headers ive had them in the past and my buddy too they both leaked like hell from the flanges. but maybe they improved them by now. good luck with your install you wont be dissappointed with the results.
AAron83- COBRA
- Number of posts : 991
Age : 41
Location : Wheaton MD
Registration date : 2008-01-28
Re: things i need to get >_>
I have a 130amp alt that I pulled off my 90 thats maybe 1 year old with less than 100 miles on it id be willing to sell for $60. It looks new. Thats because it almost is.
BobT- COBRA
- Number of posts : 875
Age : 45
Location : Westminster
Registration date : 2009-05-07
Re: things i need to get >_>
blown50stang1990 wrote:I have a 130amp alt that I pulled off my 90 thats maybe 1 year old with less than 100 miles on it id be willing to sell for $60. It looks new. Thats because it almost is.
if theres nothing wrong with it, ill take it
Similar topics
» Two Things!!!
» SMMC member checking things out
» Shocks & Struts & Springs & Things......
» well at leat a few good things happened over easter break
» SMMC member checking things out
» Shocks & Struts & Springs & Things......
» well at leat a few good things happened over easter break
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum