Maryland Patriot Stangs & Fords
Would you like to react to this message? Create an account in a few clicks or log in to continue.
Maryland Patriot Stangs & Fords

MPSF is about Friends and Car's, We believe in having fun and Helping Others, Join Us and Make some New Friend's. From MD, VA, WV, DE & PA to the world


Door

+2
RTW0223
GobigorGohome01
6 posters

Maryland Patriot Stangs & Fords :: About The Club :: History

Go down

Door Empty Door

Post by GobigorGohome01 Sun Sep 19, 2010 11:14 pm

My driver side door does not close, unless i lift it up a little bit and slam it. My one friend told me i need new pins and i looked at CJ's website and noticed they sell pins by themselves and pins with bushings. Now which one should i buy or could it be something else?
GobigorGohome01
GobigorGohome01
RUSTY MUSTANG
RUSTY MUSTANG

Number of posts : 34
Age : 34
Location : Bel Air
Registration date : 2010-06-09

Back to top Go down

Door Empty Re: Door

Post by RTW0223 Mon Sep 20, 2010 12:55 am

one friend... AKA ME.

and yeah thats my suggestion!
RTW0223
RTW0223
SUPER SNAKE
SUPER SNAKE

Number of posts : 1850
Age : 32
Location : Hagerstwon, MD
Registration date : 2008-10-19

https://www.facebook.com/ryan.wuerfl

Back to top Go down

Door Empty Re: Door

Post by TT_05_Stang Mon Sep 20, 2010 8:05 am

Pins usually fix the issue unless its worn into the hinge.
TT_05_Stang
TT_05_Stang
Admin
Admin

Number of posts : 5329
Age : 48
Location : Arnold, MD
Registration date : 2007-12-07

Back to top Go down

Door Empty Re: Door

Post by BobT Mon Sep 20, 2010 1:03 pm

I got my pins from NAPA
BobT
BobT
COBRA
COBRA

Number of posts : 875
Age : 45
Location : Westminster
Registration date : 2009-05-07

Back to top Go down

Door Empty Re: Door

Post by Grafxguy.com Wed Sep 22, 2010 10:11 pm

any auto parts store will have the pins, get bushings too just in case, if you don't need them now you will in the future.
Grafxguy.com
Grafxguy.com
GT
GT

Number of posts : 71
Age : 52
Location : grafxguy.com
Registration date : 2010-04-01

http://centralmdmustangs.com

Back to top Go down

Door Empty Re: Door

Post by mjr46 Thu Sep 23, 2010 7:51 am

you need the pin / bushing kit, the many I have done always wear the brass bushing out, brass is softer than steel and wears first. Smile

mjr46
BOSS
BOSS

Number of posts : 649
Age : 48
Location : Maryland
Registration date : 2008-02-16

Back to top Go down

Door Empty Re: Door

Post by TT_05_Stang Thu Sep 23, 2010 10:15 am

this is true... and if it gets real bad it will elongate the hinge holes and you will need to have either a new hinge installed or as I did, weld it up and drill it. Sometimes you will need a new striker plate or adjust the striker to line up with your door after you put pins and bushings
TT_05_Stang
TT_05_Stang
Admin
Admin

Number of posts : 5329
Age : 48
Location : Arnold, MD
Registration date : 2007-12-07

Back to top Go down

Door Empty Re: Door

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

Maryland Patriot Stangs & Fords :: About The Club :: History

 
Permissions in this forum:
You cannot reply to topics in this forum