Fuel Injectors

I used a version of this when I ran my supercharged setup on my fox. I had 160lb injectors on the main rails and then had 4 160lb injectors in the elbow that would turn on as boost increased.

http://www.summitracing.com/parts/AEI-14134/

Nice rails

Hey Bob
500cc per minute is approximately equal to 49lbs per hour which is equal to approximately 100hp.

And one injector cannot hold my motor. Im lookin at gettin 4 550CC or similar. I know what i needs:)

40 to 52 Lb/Hr will do what i need them too.

05 - 10 is 24lbs Thats not good:(

chrisverneuil wrote:And one injector cannot hold my motor. Im lookin at gettin 4 550CC or similar. I know what i needs:)

Didnt know you were only planning on using 1 injector.

blown50stang1990 wrote:

chrisverneuil wrote:And one injector cannot hold my motor. Im lookin at gettin 4 550CC or similar. I know what i needs:)

Didnt know you were only planning on using 1 injector.

He only has ONE piston after all

I dont have any pistons.........I was just saying Bob that even though one 5.0 injector can support 100HP It cannot support my engine for shits.

NO only weedwacker parts are interchangable!

james shut ups. You dont know crap!!!!!!!!!!!!!!!!!!!

chrisverneuil wrote:james shut ups. You dont know crap!!!!!!!!!!!!!!!!!!!

yeah I do! I have been inside your car several times

chrisverneuil wrote:I dont have any pistons.........I was just saying Bob that even though one 5.0 injector can support 100HP It cannot support my engine for shits.

Well, technically, it is a rotor, but it is still often referred to as a rotary piston.... of which you have ONE.... albeit with 3 sides...

My point was intended to be more in line with the fact that a regular V6 or V8 injector might not cut the mustard.... BUT, if you want to go on the defensive, be my guest

Its a two rotor.....

and james remember its got 100HP

chrisverneuil wrote:Its a two rotor.....

ooooohhhhhhhh.... rolling with the Big Dogs....... TWO slappy slap thingey's.... You can almost pass it off as a 6 then..... or a 3 by 2....

chrisverneuil wrote:Its a two rotor.....

. So let me get this right (write,wright) , What you're saying is; your motor is a two rotor motor or is it, your rotor motor is a two rotor motor with a threesided rotor?....what the hell.....oh it's past my bedtime you kids have fun and don't loose your dad's tools or blowup the house...goodnite

how about 3 to the 2nd power.....or the square root of 36...IDK but it has 2 rotors each rotor has 3 sides. So it could be compared to a sixxer. But a third of the size and capable of 3 or more times the power..

Do you realy stay up that late with all that rattling thru your head! Why can't you use your evil powers to better mankind, like finding away to make Bill Mahar loose his ability to speak forever. Yes a "stealth flat black" rx7 that can go fast and sounds like a paperbag full of demented hornets is ......cool I guess, but think of the good things that you could accomplish.

Will just wonder when we could meet to get them injectors. Ill run that as best i can. Ill see if i can use them 80% duty cycle.

Umm james ur gay go back under ur rock...