I need a T5 tranny!!!

Looking for a used,but good T5 tranny,for my foxbody....

urs shot? id try craigslist, Ebay and local pick and pulls such as crazy rays wich would be like 5 mins from u, Less the 4 buck to go accross the bridge twice. If anything purchase a rebuild kit with sychros bearings and seals and im sure we could bang out heads together and rebuild it:)

Yeah,I found a couple on craigslist for around 400-500 bucks.....kinda nervous about buying a used tranny though!!!...I would try to rebuild it,but I know NOTHING about transmissions....LOL....Do you know if the rebuild kits come with the gears,or just the synchros and stuff??...

I have a buddy that might o/h it for ya. Probably be a few hundred bux though. But he'll do a good job.

no gears, synchros bearings and seals

Pro50SC---Let me know how much he would charge,if you get a chance!!!...Thanks!!

Secong gear is realy bad...cant go over 2k rpm's without it grinding!!!

fasteddie33 wrote:Pro50SC---Let me know how much he would charge,if you get a chance!!!...Thanks!!

Secong gear is realy bad...cant go over 2k rpm's without it grinding!!!

I just sent him a pm. He's also a member here.

Cool...thanks,man......Where are you guys located??.....Ever come out to Glen Burnie??..We usualy get a good number of 'Stangs on Sat. nights...plus there is always at least 100 or so hot rodders!!!

I live in MoCo and he lives in West Va. His shop is in Frederick though. Don't get to Glen Burnie too much.

fasteddie33 wrote:Pro50SC---Let me know how much he would charge,if you get a chance!!!...Thanks!!

Secong gear is realy bad...cant go over 2k rpm's without it grinding!!!

generally 150-200 max, depending on how involved/ what I find, and I can almost gaurantee that 2nd gear is toast, meaning the shychro hub teeth with which the blocker rings mesh with, when I pull them apart I almost always find the teeth mushroomed flat, so you may be buying a gear or two, pending what I see upon inspection, just let me know if you want it done, I don't frequent this forum to much so If I'm slow to reply hit Bernie up and he'll give me a nudge, lol, he knows where I troll:)

I know a place that sells oem tremec/t-5 parts cheapest around

mjr46 wrote:

fasteddie33 wrote:Pro50SC---Let me know how much he would charge,if you get a chance!!!...Thanks!!

Secong gear is realy bad...cant go over 2k rpm's without it grinding!!!

generally 150-200 max, depending on how involved/ what I find, and I can almost gaurantee that 2nd gear is toast, meaning the shychro hub teeth with which the blocker rings mesh with, when I pull them apart I almost always find the teeth mushroomed flat, so you may be buying a gear or two, pending what I see upon inspection, just let me know if you want it done, I don't frequent this forum to much so If I'm slow to reply hit Bernie up and he'll give me a nudge, lol, he knows where I troll:)

Thanks bro, I knew you'd pop in here.

fasteddie33 wrote:Cool...thanks,man......Where are you guys located??.....Ever come out to Glen Burnie??..We usualy get a good number of 'Stangs on Sat. nights...plus there is always at least 100 or so hot rodders!!!

Where in Glen Burnie do you hang out on saturdays?

mjr46--Cool..let me know about a 2nd gear and a rebuild kit or a fully rebuilt tranny!!

Dark KnightV6--Right now,we just cruise Ritchie Hwy and might hang out for awhile in the Pep boys parking lot..but in a couple weeks we will be at Marley Station Mall with all the hot rodders,but we use the other parking lot on the side!!!

Damn im gonna have to come out then. You cant miss me, the car is insanely loud.

DarkNightV6 wrote:Damn im gonna have to come out then. You cant miss me, the car is insanely loud.

Ya cause it sounds like you got something shoved up ur tail pipe and ur cars screaming to get it out
Now you uncork my car and mine sounds like a dam V8 under the hood

LOL.....Cool...Im sure alot of people will be out this weekend since it gonna be so nice!!!

fasteddie33 wrote:mjr46--Cool..let me know about a 2nd gear and a rebuild kit or a fully rebuilt tranny!!

Dark KnightV6--Right now,we just cruise Ritchie Hwy and might hang out for awhile in the Pep boys parking lot..but in a couple weeks we will be at Marley Station Mall with all the hot rodders,but we use the other parking lot on the side!!!

I can't give you an exact idea of what I'll find, just based on your description I can assume that's the issue, I just did a full rebuild on my 85 tranny and I bought a complete cluster kit = cluster gear, and gears 1-4 and a bearing and blocker ring kit and cluster kit was 300.00 and bearing/rebuild kit was 200.00, that is what I call a nearly full rebuild, and overhaul is just the bearing/blocker ring kit, the first thing to do is take it out and inspect all parts , then I make a list and let you know what it truely needs, that's the only/proper way to effectively repair /rebuild a manual tranny

Cool...tonight we are all meeting at the Wal Mart in White Marsh around 6pm.....We could meet up if you want!!??